Introduction of Cable Grips  

Do you know the different names for Cable Grips? We usually refer to it as "cable grips" but it also goes by other names, such as:

Cable mesh sleeves

Cable Pulling Grips

Cable Pulling Socks

Wire mesh grips

Regardless of the names, it's the same product in reality.The cable grip is used for protecting the cable during pulling the cable, because the cable grips' special design. As pulling the cable, cable pulling protector will string the cable, at the same time, protect the cable.

The Characteristics Of Cable Grips 

1. With flexibility, moderate softness, high elasticity, wear resistance, corrosion resistance, closely mesh, the cablecan easily set into the open mouth, passing the bend easily, will not hurt the cable, it is
2. Cable grip is the mesh structure, it willbe tighter if you pull it, only need to stay in the opposite direction to promote network, cable can be easily wear into or easily take out .
3. There are three materials available for compression connection: aluminum alloy sleeve compression, coppersleeve compression, and stainless steel sleeve compression.
4. The cable gripsleeve's wire rope fitting crimping section is hydraulically pressed using Sweden's TALURIT and Taiwan's WIROP machines, ensuring a smooth finish and high tensile load capacity.
5. The material can be hot-dip galvanized high-strength steel wire rope, stainless steel 304, stainless steel 316,non-metallic and other materials, using composite weaving methods such as single strand, double strand, triplestrand, multi strand and multi-layer.

Installation Method Of Cable Grips

1.Compress the cable grip in the direction of the arrow and expand its diameter.